1. When the cutter reaches the end of its movement, make sure the blade is fully separated from the workpiece before disconnecting it from the machine and pump. Then, open the sealing door to remove the workpiece safely. 2. Diamond tools are expensive and sensitive. Avoid any impact when clamping the rock to prevent blade deformation, which could affect cutting performance and quality. 3. During normal cutting operations, avoid sudden adjustments to the feed rate. This can cause damage to the blades and other components of the machine. 4. If you hear unusual noises from the host during cutting, stop immediately and check for any potential issues. Continuing operation may lead to further damage. 5. Always monitor the coolant flow. Insufficient cooling water can increase blade wear and reduce its lifespan. Make sure the system is properly maintained and filled with coolant at all times. 6. Ensure that all connections are secure and leak-proof. Install leakage protection devices if necessary to prevent accidents and maintain a safe working environment. Proper maintenance and careful handling of the rock cutting machine will ensure long-term performance and safety. Always follow the manufacturer's guidelines and keep the equipment in good condition. Shanghai Janetec Electric Co., Ltd. , https://www.janetecelectric.com
Rock Cutting Machine - Safety and Operating Instructions