平板载荷测定仪操作规程与维护-华强电子网

Customizable WIFI test head for various specifications
Test - small jpg file
Kaixinwei Test
LC03-3.3 SOP8 TVS ESD Protection 3.3V

Product Name:

Plate Load Tester

One,

Plate Load Tester

Overview

Designed for testing the subgrade reaction modulus of coarse and fine-grained soils, as well as compacted soil bases and road foundations. It can also be used to calculate the deformation modulus of uniform foundation soils. Manufacturer direct sales of Plate Load Tester.

Two,

Plate Load Tester

Operating Procedures

　

1

, Place the load plate on the prepared test site. It is recommended to lay a thin layer of fine sand underneath for better stability.

　　

2

, Drive the loading vehicle to a position within 1 meter from the test point, ensuring that the rear beam of the vehicle is directly above the load plate.

　　

3

, Position the jacks on top of the load plate.

　　

4

, Install the measuring bridge in a symmetrical position relative to the test point.

　　

5

, Turn the jack's lifting screw until it contacts the rear beam of the vehicle. If the height is insufficient, use an extension rod.

6

, Mount the dial gauge on the dial gauge bracket and ensure the measuring rod is vertically aligned with the load measurement point.

Three,

Plate Load Tester

Daily Maintenance

　

1

, Keep the pressure gauge clean. Avoid pulling or hitting the dial gauge, and make sure the measuring rod is free from dust and oil. When not in use, cover the dial gauge and pressure gauge with plastic covers and store them in a dry indoor area to prevent cracking and moisture damage.

　　

2

, Regularly replenish the hydraulic oil in the oil pump using 10号 motor oil. The oil inlet is located at the back of the cylinder body, and the oil capacity should be 1 liter.

　　

3

, Before testing, tighten all the locking screws to ensure they are secure and not loose.

　　

4

, During testing, the dial gauge's measuring rod must be perpendicular to the load plate surface, and the diameter should be consistent.

Mitsubishi Diesel Generator

Mitsubishi Diesel Generators :

·Engine and alternator shall be mounted on a same frame steel skid.

·Built-in damper for anti-vibration.
·Small size, low weight, easy to operating, installation and maintenance.
·World most famous brand diesel engine: Mitsubishi Engine
·World famous brand AC alternator: Stamford, MeccAlte, Leroy Somer, etc
·Advanced and reliable controller: Auto Start AMF & Remote control by PC with RS232/485
·Full range protect function and alarm shutdown feature.

·Comply with ISO8528 national standard and ISO9001 quality standard.

Mitsubishi Diesel generator,Mitsubishi diesel genset,Mitsubishi genset,Mitsubishi generator,Mitsubishi diesel engine

Guangdong Superwatt Power Equipment Co., Ltd , https://www.swtgenset.com