Bidding number: 0612-1640A4300294/13 Wire harness & Cable assembly:The terminal wire in the electronic machine can effectively solve the problem of control and wire diameter of equipment installation. In addition, the installation operation is more convenient and safe. It is mainly reflected in that the secondary wiring is not easy to start, and other secondary wires may be touched during connection; if the primary connection wire diameter is small, the wire diameter is too large. For the cabinet with high segmentation degree, the bending radius is a problem, and the stress problem will occur, The switch may be damaged; in addition, the wire nose required by the installation specification may be greatly larger than the installation point of the component itself, and these terminal machines can effectively solve the problem. Wire harness & Cable assembly ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com
Huizhou Natural Gas Power Plant Expansion of Cogeneration Project Announcement of Tendering of 13th Auxiliary Equipment 13th Package 380V Low Voltage Power Cable
Under the entrustment of Guangdong Huizhou Natural Gas Power Generation Co., Ltd. (hereinafter referred to as the “Tenderee†or “Buyerâ€), the tendering of equipment for the above-mentioned project and the services thereof are publicly invited. The potential bidders (hereinafter referred to as bidders) who are interested are invited to The request of the announcement is to apply for registration.
The LNG power plant has an initial phase of 3×390MW (F class), and it has expanded three sets of 460MW F-level improved, highly efficient one-to-one-shaft cogeneration gas-fired steam combined cycle units. Each combined cycle unit includes one (1) low NOx gas turbine (hereinafter referred to as gas turbine), one (1) gas turbine generator, one (1) steam turbine (hereinafter referred to as steam turbine), and one (1) turbine Generator, one (1) heat recovery boiler and related auxiliary equipment. Units #4, #5 and #6 are expected to be put into operation in December 2017, March 2018 and June 2018 respectively.
The host adopts M701F4 type gas turbine and 150MW turbine produced by Dongfang Electric Group Dongfang Steam Turbine Co., Ltd., and its supporting generators are produced by Dongfang Electric Group Dongfang Motor Co., Ltd. The waste heat boiler is produced by Dongfang Hitachi Boiler Co., Ltd. Horizontal, non-combustion, natural circulation waste heat boiler.
Bidding number/package number Equipment name Quantity/Unit
(According to technical specifications)
0612-1640A4300294/13 380V Low Voltage Power Cable See Technical Specifications
For details, see the second volume of "Commercial Conditions" and the third volume "Technical Specifications" of this tender document.
(1) The bidder shall be a legal entity within the territory of China that is a corporate legal person within the territory of the People's Republic of China that responds to bid invitations and participates in bid competitions, and has the power to conclude contracts independently.
(2) Manufacturers who have the ability to design and manufacture similar auxiliary equipment and performance in the tender section of the design, manufacture, sales, and approval of the relevant national authorities.
(3) The bidder should have good bank credit and business reputation, not be ordered to suspend business or go bankrupt, and the assets have not been reorganized, taken over and frozen; bidders should be legally and financially independent, legally operated and independent For the bid solicitor, the bidder has not directly or indirectly hired or has hired the tenderer, and the company that has produced the technical specifications and other documents or provides consulting services for the bid invitation includes its affiliates; the legal representative is the same person. The two or more legal persons, the parent company, the wholly-owned subsidiary and its holding company shall not bid at the same time in the same goods bidding; legal persons, other organizations or individuals that have a stake in the tendering party and may affect the fairness of the tender, shall not Participate in bidding.
(4) This tender does not accept bids in the form of consortium.
(5) Before registration, the bidder must establish an enterprise credit file (IC card) at the Guangzhou Public Resource Trading Center. Note: The integrity file (IC card) should be within the validity period. .
The bidder must provide at least two power plant projects (300MW and above) for low-voltage (380V) cross-linked polyethylene cable equipment provided by manufacturers and bidders from January 1, 2008 to December 31, 2015. Each project is not less than 10 km) performance. If there is any inaccuracy, the tenderee has the right to reject the bid.
(2) The bid documents provided by the bidder shall be the contract agreement that clearly shows the project name and scope of supply. .
4. Bid applicants who are interested and meet the eligibility requirements of Article 3 of this announcement must register and submit the “Guangzhou Construction Project Bid Application Form†before registering.
5. In this project, qualified bidders who meet the qualification requirements of Article 3 of this announcement shall apply for the registration and other relevant formalities according to the requirements of this tender notice; otherwise, the bid registration will be invalid. The specific arrangements and processes are as follows:
5.1. The date of the tender announcement and the arrangement for bidding registration:
Announcement Date: February 15, 2017 - February 20, 2017