How ZTE Set Top Box Connects TV, Connects to Network, and Password Cracks

ZTE's network set-top box is IPTV, which is more fluent than ordinary network set-top boxes. Since ZTE network set-top boxes are generally Unicom or telecom-customized network set-top boxes, its introduction and related tutorials are relatively small. TV sets will be connected to ZTE set-top boxes. It explains the connection network and password cracking.

Meet ZTE network set-top box

ZTE network set-top box front panel

Operating status indicator, indicator light is off, it means that it is not on, bright red is in standby status, green means normal work, and yellow means that the set-top box is faulty. Connection status indicator. The indicator light is on green to indicate that the network is normal. Off indicates that the network is not connected or the network is faulty. Infrared signal indicator, when the set top box receives valid remote control information, the indicator light flashes the infrared signal receiving window for receiving the infrared signal of the remote controller.

Rear panel interface

USB interface, 2 Ethernet interfaces: Connect to the external network S-video output interface Composite video output interface Audio output interface: L left channel, R right channel power interface: Please be sure to use this machine supporting +12V power adapter set-top box power supply switch

ZTE network set-top box to connect TV

ZTE network set-top boxes provide two types of video output interfaces for connection to televisions. Please select an optimal wiring method according to the existing audio and video equipment (such as TV, audio, etc.) interface.


Use the audio cables (red and white) in the AV cable to connect the R and L interfaces of the set-top box to the same-color interfaces corresponding to the TV. Choose one of the following ways to connect the video. In the following figure, line 1 connects the CVBS port of the set-top box and the video input port of the TV set with the video cable (yellow) in the AV cable. Figure 2 below shows the S-Video port of the set-top box and the S-Video port of the TV set.

ZTE network set-top box connection network

ZTE network set-top box supports two types of network connection methods. ADSL cats are directly connected to router LAN ports. We can access the network according to our own needs.


If we only have the ITV service, we only need to connect the set-top box's WAN port to the cat's LAN2 (ITV port). If we have opened a broadband service at the same time, then the WAN of the router is connected to the cat, and the WAN interface of the set-top box is connected to the LAN port of the router. At this time, it should prompt that the connection cannot be made. The two buttons “OK” and “Cancel” appear. Click OK to retry. Cancel to enter the settings. We press to cancel entering the settings, one of which is to let us select the access method, dial or LAN, we choose to select the LAN, set the next IP address can (can refer to the computer's IP address setting method, IP last one difference Yes, subnet mask, network management, and DNS are all the same.)

Remote Control Introduction


ZTE's remote control is a learning type remote control. It can learn the functions of a TV remote control. This way, you don't want to use two remote controls to watch TV. Please refer to the pictures for specific buttons.

ZTE network set-top box password cracking

Many netizens are asking about the password cracking of ZTE's network set-top box. After searching for information, the answer we got is: The password for ZTE's network set-top box to enter the system is 6321. If we forget the ITV password, we can only call customer service or take an identity. To the business hall.

510 Thread Cartridge

510 Thread Cartridge,Battery Pen 510,Rechargeable Cbd Battery,Adjustable Voltage 510 Battery

ALD GROUP LIMITED , https://www.aldvapor.com