PD 2.0 is currently being gradually applied to devices such as millet notebooks, ThinkPads, and XPS. It uses the USB-C interface for charging, and this interface can also be used to connect USB devices when not charging. Maximize the use of an interface. But this is also an annoying problem. QC3.0 and PD2.0 protocols are not compatible with each other. If those Widnows mobile devices can support the QC charging protocol, then they can be used with current mobile QC chargers. However, adapters that support PD 2.0 are few, and mobile power that supports PD 2.0 is barely available. But the life of mobile devices, especially Windows devices, has always been a big problem, either buying official expensive adapters or buying replaceable mobile devices. So there is no product like mobile phone power supply to power the laptop? Now there is: Purple Rice No. 10 mobile power. Purple rice No. 10 mobile power can be said to be the first mass-produced PD 2.0 portable power supply in China. Purple rice out of this support for PD 2.0 protocol mobile power, can be considered to solve many of the notebook's battery life. After announcing orders, I waited anxiously for a month before finally looking forward to this new product. At the end of the Chinese New Year, there is no need to worry about electric shock. â–²Crowdfunding packaging or carton â–² The seal has basic information about the power supply. â–² The purple rice No. 10 mobile power packaging is still relatively millet style. Consistent with the packaging style of other millet products. â–² behind the packaging is the basic parameters and production information â–² The bottom left is the security label. This, I think it is also purple rice is afraid of high imitation. Now, as long as there are popular good things, there will be copycat factories to imitate. This is also a kind of sadness. â–² Origin is Kunshan, Suzhou, Jiangsu Province. Production time is January and it is now January 16. It seems this power is still quite fresh. â–² Open the package to see the main body of the mobile power supply. â–² It can be seen that the packaging of this mobile power supply is more sophisticated and uses a layer of foam on the top cover to fix it. Can be considered worthy of 199 crowdfunding prices. â–² family portrait, the first feeling of this mobile power is mellow. It was made into a garden all around. The attachments are as few as ever, with only one paper description and one dual-use USB cable. â–² No. 10 mobile power is more complex, the instructions are more important, it is best to read the instructions carefully before use. Many people do not like to read the manual. In fact, the manual is very useful and can provide you with complete information on product usage and points for attention. For example, the No. 10 mobile power supply has a special USB HUB function and needs to be activated by double-clicking the power button. The mobile power source indicates the power parameters. â–²The production date is December? Packaging date is January? So after the production has been waiting for packaging? ? â–² The power supply has 3 interfaces, 2 USB-A and 1 USB-C interface. The USB-C interface is also responsible for input and output functions. According to the parameter description, USB-A supports output up to 18W, and USB-C supports output up to 45W. The USB-C interface is also under the PD 2.0 protocol for maximum power output. The power supply only supports USB-C charging. It is not possible to use the USB-C output and the USB-C output to use the mobile power supply as a power adapter. â–² can feel this piece of mobile power is quite heavy. Total weight 405 grams, heavyweight players. It is 100 grams heavier than the iPad mini. â–² The whole mobile power supply is a hamburger structure. A plastic frame and a circuit are sandwiched between two upper and lower metal casings. The appearance is different from the previous millet mobile power supply, and the dismantling place has not been found yet. â–² The supplied data cable supports the charging of Micro USB and USB-C devices. â–² No. 10 mobile power operation and indicator are designed in the side. In total, there are 4 power indicators and a status indicator. The power indicator light has a small brightness, which can be said to be low light pollution, or it can be said to be difficult to see. â–² Double-click the button will start the HUB mode of the power, at this time the state is bright blue. If you do not use the HUB function, it will be turned off after 2 minutes. â–² The access device will also charge the device when the HUB mode is turned on. Only HUB function only USB2.0 speed, then U disk and mouse keyboard adapter can still be competent. To speed up the data transmission is a bit powerless. â–² Perform a discharge test on the USB-A interface. Test results show that the interface will trigger protection up to 3.0A and cut off power supply. The highest power is 14.7W. â–² Continue to test the USB-A interface. After the 12V power supply of the QC3.0 protocol is triggered, the power continues to be tested. Protection was not triggered until 2.89A in the test. The actual output maximum power is 34.4W. This is probably the maximum power that USB-A can achieve at full power. â–² Change the USB-C interface for testing. The USB-C interface has a 5V constant voltage. The test result is 3.2A trigger protection. The actual maximum output power is 15.6W. Due to the lack of PD 2.0 testing tools there is no PD2.0 power test. Purple Rice 10 is still one of the few mobile power sources supporting the PD 2.0 charging protocol. The 20,000mAh large capacity and the highest 45W output indicate that it is not just a mobile power that can only be used for emergency use, but can be continuously powered for a long time. , so that you can enter the working condition at any time. Hub functionality is supported so that an external mouse and keyboard no longer take up valuable interface resources. 1:20000mAh large capacity. 2: Supports PD 2.0 charging protocol and supports QC3.0 charging protocol. PD 2.0 supports up to 45W output, and QC 3.0 can output up to 34.4W. 3: With USB 2.0 Hub function, the Hub function can be used to charge the device at the same time. 4: The output function is sufficient and stable. 5: Supports chargers that use the PD 2.0 protocol to charge mobile power. Up to 45W can be entered. The charging speed is very alarming. Large capacity does not have to wait long. 6: Crowdfunding price of 199 yuan better cost performance, 169 yuan a stall that cost performance. 1: Only the USB-C interface supports the PD2.0 protocol. You must use the USB-C to C cable to implement PD 2.0 protocol charging. 2:405 grams is a bit heavy. 3: The Hub only has a USB 2.0 specification and cannot be used to transfer data at high speed. 150W Medical Adapter,Medical Biochemical Device Adapter,Medical B Ultrasound Adapter,150W Medical Outlet Adapter Shenzhen Longxc Power Supply Co., Ltd , https://www.longxcpower.com
