Skyworth is the leading enterprise in domestic TV, and many users are very interested in Skyworth TV. But no matter how good a TV is, it will take a long time to appear various problems. Today, Xiao Bian talked to everyone about how Skyworth TV restored the factory settings. Interested friends should not miss it. Factory reset steps: 2. Click the button on the remote control with three bars to pop up the setup menu. 3, click Settings, enter the settings interface, enter the system settings. 4, choose to restore the settings. 5, it is recommended to choose to delete all programs, this can be a big clean system. 6. Click on your immediate restore below. 7. The system will ask for confirmation again. Click OK to confirm. Method Two: Camera Gimbals use for camera to get good quality video. Gimbals can reduce the drone shocks via Shock absorber balls and brushless motors. always can keep the video pictures horizontally , and adjstable of the pitch angles. Usual application to Security Patrol Drone,Exinguisher Drone and Survey Mapping Drones etc. Camera Gimbals Drone Gimbals,Gopro Gimbals,Gimbal Stabilizer,2 Axis Gimbals shenzhen GC Electronics Co.,Ltd. , https://www.jmrdrone.com
method one:
1. Open Skyworth TV and enter the home screen. 
1. Decrease the volume to “00â€, press and hold down the “Volume minus†button on the panel, and press the “On-Screen Display†button of the remote control at the same time to enter the factory debugging mode.
2. In the factory debugging mode, press the number key “6†on the remote control. The “P-MOD†menu (requires password input) will be displayed on the screen. Press the number keys “7â€, “8â€, and “9†in order. ".
3. Press the “Menu†key four times in succession to call up the “PE-2†menu. Move the status bar (cursor) to the “INIT†item and press the “Volume Plus†button to make the “INIT†item data from “00â€. †becomes “FFâ€. If the parameter of the "INIT" item cannot be changed to "FF", or it is still an English menu or cannot be received after changing to "FF", it is necessary to check whether the seventh pin of the EEPROM is low level during initialization.
4, press the AC power switch off, and then restart, that is, complete the initialization operation.
Precautions:
1. Restoring the factory settings may result in the loss of your data. Please be careful to keep data and account information.
2. After the initialization operation is completed, we also need to adjust other parameters (such as line width, linearity, and function options).