Flat Fiber glass wrapped Aluminium Wire for winding machine
Copper or Aluminum rectangular Wire
Narrow side size a : 0.80mm-5.60mm
Broad side size b : 2.00mm-16.00mm
Copper or Aluminum Round Wire
Diameter:φ1.7-φ5.0
If specification is out of range, please
Glass Fiber Film Covered Flat Aluminium Wire Flat Copper Wire,Glass Fiber Film Covered Flat Aluminium Wire,Flat Aluminium Wire,Glass Film Covered Flat Wire HENAN HUAYANG COPPER GROUP CO.,LTD , https://www.huaonwire.com
In terms of product development progress, Jingji said that in 2012 Q4 will produce 85 kg of crystal chips and produce 8-inch crystal columns. The company also began shipping 4 inch pattern painting polishing films in the first quarter of 2012. Currently, the shipments are still small, but the revenue contribution is relatively significant compared to 2011.
According to the crystal technology, the shipment of 4-inch polished film should exceed 5,000 pieces this month, and in 10,000 pieces in September, it is expected to reach 20,000 pieces by the end of the year. It is estimated that the sapphire substrate accounted for 3% of revenue in 2012, while in 2011 it only accounted for about 1%. Although the first quarter sapphire substrate still showed a small loss, and the company has received a larger number of orders in the second half of 2012, as the shipments increase, the sapphire substrate business will have a chance to make a small profit.
About Glass Fiber Film Covered Flat Aluminium Wire
Crystal technology is optimistic about the LED industry is expected to make a small profit this year
Jingji expects the LED industry's future growth potential to be expected. The company continued to invest in 2012 and has received a large number of orders in the second half of the year. The company expects shipments of 4 inch polished wafers to reach 20,000 units by the end of the year, and sapphire substrates can account for 3% of the group's revenue. In 2012, there is also a chance to make a small profit.
Fiber Glass lapped conductors (bare or enameled) are very suitable for windings of electric
motor stators, generators, special transformers and high voltage motors. In general this
insulation can be applied where high mechanical strength and high insulation properties
are required. It exhibits a very high degree of mechanical and thermal stability.
Temp. Class:F 155°C,H 180°C
Type of Insulation: Single /Double Layer of Glass Fiber
& Impregnated with Class F 155°C,H 180°C Varnish