Solar Street Lights are raised light sources which are controlled by solar powered boards commonly mounted on the lighting structure or coordinated into the shaft itself. The sunlight based boards charge a battery-powered battery, which controls a fluorescent or LED light during the night. There are two types of solar light generally in the lighting market which called all in on solar street light and split solar street light.
Features of solar street lights: A modern solar street light has embedded solar panel, inbuilt lithium-ion batteries, battery management system, night and motion sensors as well as automatic controls. The fully automatic device comes with LEDs, inbuilt and replaceable Lithium-ion battery and passive infrared (PIR) sensors. A typical solar street light is weather-proof and water-resistant, has low insect attraction rate and low glare and has a longer life.
Advantages of solar street light:
Environmental protection: solar energy is green, clean and renewable energy. And the widely using of the solar lights can low down the emmision of the carbon dioside.
Cost less to save money: Since the solar lights can be 100% energy, zero electric bill will be paid after the customers install the solar lights. And customers can also save the cost in wire trench.
More easy installation: Does not like electric lights, there is no need wire trench for solar light installation. Everyone can install the solar lights in a very shorten time.
more safe: Solar lights is DC low voltage compared to dangerous 110-220V AC electric power, it does not harm to human.
Solar Street Lights Solar Street Lights,Solar Walkway Lights,Solar Powered Security Lights,Solar Street Light With Battery Jiangmen Biaosheng Solar Energy Technology Co., Ltd. , https://www.bsprosolar.com
Installation Process 1 Download ADB One-click Installation Tool→2 Computer and TV Connect with a Router→3 Run ADB Open Tools→4 One-Click Installation Completed
Steps Step 1: Download ADB open tool and one-click installation tool
With the computer to download and decompress, there are two folders of TCPUDP debugging tool and one-click installation software, as follows 
Follow the steps to view the tcl smart TV's IP address as illustrated:
System settings 
Network settings 
Cable network settings 
Tcl TV automatically obtains an IP address 
Check the TV's IP 
Open the TCP UDP debugging tool 
- If the message "unable to connect ip" is displayed, or if the IP address is wrong, do not tick the hexadecimal place in this step.
Step 2: Run one-click installation, install the sofa butler into another folder - "One-click installation", double-click "Double-click to run a key installation" to enter the command interface and enter the IP address of the device obtained in the previous step, and press Enter to wait. can. 
If the message "unable to connect ip" is displayed, or if the IP address is incorrect, do not select the hexadecimal place in the TCP UDP debugging tool step.
Note for installing butler: If you use the sofa butler to download the application, it stays in the installation state, or you are prompted to prompt the words "Prohibited to install unknown source". Please turn on the automatic installation in “Settings†of the sofa butler kit, or try to plug in an external SD card and try again. 
TCL D42A710 one-click install third-party applications
The TCL TV D42A710 installs the sofa butler through ADB one-click installation tool. Other models of the TCL D42A710 can also refer to this tutorial.
If the installation fails, restart the device and try again by following the steps. Still have questions please add the following sofa butler official QQ group.
Watch on-demand video on smart TV, recommend using pudding video; Watch live TV, recommend HDP live broadcast; More interesting content, please use Tencent video TV version, TV; Fun smart TV and box, more exciting content in Sofa net.